Drie weergaven, één RAW
Ontwikkel hetzelfde RAW-bestand afzonderlijk voor schaduwen, middentonen en hooglichten. Meng ze met instelbare bijdragen en maskerbereik en bekijk elke belichting en elk masker direct.
DYNARAW 2.0 · macOS
Eén RAW. Drie belichtingen.
Grip op elke overgang.
DynaRaw 2.0 is een RAW-processor waarin beelddetail vooropstaat. Ontwikkel schaduwen, middentonen en hooglichten afzonderlijk, bekijk de contributiemaskers en bepaal elke toonaanpassing zelf.
Versie 2.0.0 wacht op App Store-beoordeling. De huidige uitgebrachte versie is 1.3.6.

BEKIJK DE WORKFLOW
Een demo met uitleg over belichtingsmenging, contributiemaskers en controle op volledige resolutie. Engelse gesproken uitleg · 3 min 25 sec. Opgenomen met de eerdere HDR-interface; de schermafbeeldingen hierboven tonen 2.0.0.
This portrait is a good test for tonal blending. The woman stands in deep woodland shade, while direct sunlight catches her hair, white shirt, and the leaves behind her. The raw file contains useful information at both ends of that range, but a single global exposure cannot present it all cleanly.
With tonal blending switched off, Dyna Raw behaves like a conventional raw processor. The main Exposure control changes the whole photograph. The current midtone setting gives a plausible starting point, but the face remains subdued and the brightest fabric and foliage are already close to clipping.
Push that one exposure higher and the face and forest open up, but the sunlit shirt and hair lose structure. Pull the exposure lower and those highlights become safer, but the face and background sink into shadow. Neither rendering is wrong. Each contains detail the other cannot show at the same time.
Tonal blending keeps those useful renderings separate. The main Exposure setting remains the midtone anchor. A brighter raw rendering can supply selected shadow information, and a darker rendering can supply selected highlight information. Dyna Raw combines them in floating point, instead of flattening the image with hidden automatic tone mapping.
Here is the shadow exposure used by this preset. It contains the lift needed around the face and in the woodland. Here is the highlight exposure. It holds back the white shirt, bright hair, and sunlit leaves. The final image does not simply average the two; it uses each only where it is useful.
The contribution controls set how strongly each branch enters the result. Shadow contribution governs the brighter rendering. Highlight contribution governs the darker rendering. The reach controls decide how far each branch extends into neighbouring tones. Conservative reach preserves local contrast and avoids the flat, artificial look associated with aggressive high dynamic range processing.
The masks make that selection visible. In the shadow mask, lighter areas receive more of the bright branch, while darker areas are protected from it. The highlight mask shows where the darker branch is allowed to act. Grey regions are gradual transitions, so there are no hard cut-outs around the subject.
For this portrait, the highlight mask reaches across the backlit hair, shirt, and bright foliage, while the shadow branch is restrained enough to keep the face natural. The preset is not chasing maximum brightness. It is preserving usable detail while keeping the lighting believable and the controls explicit.
At normal window size, the fitted preview is scaled down, so it cannot reveal final noise or fine texture. Move the magnifier over the hair highlight for a true one-hundred-percent check. These two views compare the same small area without tonal blending and in the final result. This is where you judge individual strands, sharpening, and noise reduction.
The final result keeps the sunlit material readable and lifts the shaded subject without turning the forest flat. Start with modest contributions. Inspect the branch exposures, inspect the masks, and check detail at one hundred percent. Dyna Raw keeps every tonal decision visible, while preserving floating-point processing, genuine sixteen-bit TIFF saving, and direct transfer to Photoshop.
DETAIL VOOROP. JIJ BEPAALT.
Ontwikkel hetzelfde RAW-bestand afzonderlijk voor schaduwen, middentonen en hooglichten. Meng ze met instelbare bijdragen en maskerbereik en bekijk elke belichting en elk masker direct.
Bewaar benoemde beeldpresets voor RAW, kleur, curven, tonale menging en schaal. Afzonderlijke uitvoerpresets bewaren JPEG-kwaliteit, bitdiepte en ICC-profielkeuzes. Laad, hernoem of verwijder presets wanneer je workflow verandert.
Vergelijk de oorspronkelijke RAW-ontwikkeling met het bewerkte resultaat in het vergrootglas op volledige resolutie. Beoordeel fijne structuur, ruis en verscherping op ware pixelgrootte.
Gebruik schaduw- en middentoonruisonderdrukking in voorvertoning, vergrootglas en export. Optionele Core ML AI-ruisonderdrukking werkt lokaal op ondersteunde Apple Silicon-Macs en past de tegelgrootte aan het beschikbare geheugen aan. Core Image blijft beschikbaar als AI uitstaat of niet beschikbaar is.
Werk met live curven en instellingen voor belichting, witbalans, kleur en detail. DynaRaw voegt niet ongemerkt tonemapping of hooglichtcompressie toe; de verwerking met drijvende komma geeft beelddetail voorrang.
Behoud echte 16-bits uitvoer voor TIFF, PNG, Photoshop en Affinity Photo. Kies ICC-beheerde Adobe RGB- of sRGB-uitvoer en stel de uitvoerschaal exact in met live pixelafmetingen.
Exporteer JPEG, TIFF, PNG, PDF of SVG. Stuur direct door naar Photoshop of Affinity Photo of verwerk een serie RAW-bestanden met opeenvolgende bestandsnamen.
Werk in het Engels, Nederlands, Duits, Frans, Spaans, Italiaans, Japans of Deens.
Deze functies beschrijven de ingediende macOS-update 2.0.0, die momenteel wacht op App Store-beoordeling. De App Store biedt nu versie 1.3.6 aan. Controleer de vermelding op actuele vereisten en beschikbaarheid voordat je koopt.